Top 4 Different Types of TV Wall Mounts

Nowadays, different types of TV wall mount brackets are available, from which you should pick only the suitable one. The types are low-profile (also termed as fixed or flat), full-motion mounts, tilting mounts, and ceiling mounts. However, all of them have their own benefits and drawbacks.

Tv Wall MountsLow-Profile Wall Mount

Usually, low-profile TV wall mounts brackets are very easy-to-install and budget-friendly, as compared to full-motion or tilting wall mounts. The procedure for wall mounting in case of low-profile mount is slightly more difficult compared to hanging a weighty picture on the wall.

However, this easy installation facility comes with a considerable factor and that is you will not able to adjust the TV following its installation. Low-profile mounts don’t move left and right or up and down and they don’t tilt as well. The inability to movement makes it a complicated task of switching out cables.

Full-Motion Wall Mount

Full-motion TV wall mounts are full motion – what they proclaim. Such type of motion will come with an investment that makes these full-motion wall mounts the most expensive one in this category.

Apart from the cost, the full-motion wall mounts are generally more complicated while it comes to the question of installation. As the mounting bracket is featured with moving pieces (an arm), you will require two or three individuals to hang that TV on the wall mount bracket.

The main difference between a full-motion and a tilting wall mounts is that the former one permits you to alter the angle of horizontal viewing by moving the flat panel physically off from the wall. It is possible due to the fact that full-motion wall mounts are featured with a movable arm connecting the flat panel to the wall. The particular arm helps to extend the TV off from the wall so that you can hinge it on its horizontal axis. As per Virtue Review, Full motion wall mounts are the most popular types of wall mounts in the world.

Tilting Wall Mount

You need to invest a little more for purchasing the Tilting Wall Mount, as compared to the low-profile wall mounts. Its cost is little less than the full-motion wall mounts.

You can install Tilting wall mounts with the same extent of ease just like the low-profile mounts. The key difference between a low-profile wall mount and a tilting wall mount is that you can alter the vertical viewing angle while utilizing a tilting wall mount.

The wall mount is featured with a pivot in between of the installation bracket – like a seesaw turned on its side. The pivot is helpful in maintaining a decent viewing angle whether you are standing on a ladder or lying on the floor.

It signifies that changing out cables is easier in case of a tilting wall mount bracket, as compared with low-profile wall mount, however, the tilt feature is restricted. If you are searching for tilt or horizontal swivel, then a full-motion wall mount is an appropriate option for you.

Ceiling Mount

While mounting the TV to the wall is not an alternative, a ceiling mount might be an option. As these brackets are fixed to the ceiling, most of the ceiling mounts revolve and tilt in every direction.

Now, you should choose the appropriate one, as per your requirement.

Source :-

You May Also Like

About the Author: nit agartala

Leave a Reply

Your email address will not be published. Required fields are marked *