Detail Profile

Educational background

M.M.E., Jadavpur University
Ph.D., IIT, Powai, Mumbai

Alumni

NIT Durgapur, Jadavpur University, IIT Mumbai

E-mail

pkbdirector@gmail.com,pkb32@yahoo.com

Telephone No.

0381-2346630

Fax No.

0381-2346630 /2346360

Areas of Specialisation

Thermal Engineering, Automotive Engineering

Project Supervised�
(Principal Investigator / Co-investigator / Co-ordinator)
�

Membership of professional bodies:

Membership in Scientific and Professional Societies :
Fellow of Institute of Engineers (I),
Member of Combustion Institute (U.S.A),
Member of Indian Institute of Welding,
Member of Indian Society of Technical Education,
Member of Indian Society of Value Management,
Member of Indian Society of Engineers,
Member of Association of Engineers, Divisional sub-committee members of I.E., Member of SAE (USA).
Member� of Indian Institute of Metals (Life membership)

Teaching Experience

More than 28 years

Thesis supervised

M.M.E. Thesis : 28 nos.
Ph.D. : Awarded 27nos.
Ongoing 11 nos.
�

Books / Monographs / Edited Volumes

�

Publications

125 (One hundred twenty five only)

International Journal :� 54 nos.   (Published)
National Journal   :� 6 nos.     (Published)
International Conference / Seminar� :� 40 nos.   (Published)
National Conference / Seminar   :   25 nos.   (Published)
�

Honors/ Awards/ Fellowship received

The American Biographical Institute Board of International Research has nominated for MAN OF THE YEAR, 1999 for overall accomplishments & contributions to society.

Recommended as a Member in the INTERNATIONAL DIRECTORY OF DISTINGUISHED LEADERSHIP, USA.

Recommended as a Member in the THE AMERICAL BIOGRAPHICAL INSTITUTE SINCE 2001.

International Biographical Centre, Cambridge CB2 3QP, England (UK) has Nominated as INTERNATIONAL INTELLECTUAL OF THE YEAR, 2001.

Patents Obtained

7 nos.

Corporate Member of Professional Institutions

Fellow of Institute of Engineers (I), Member of Combustion Institute (U.S.A), Member of Indian Institute of Welding, Member of Indian Society of Technical Education, Member of Indian Society of Value Management, Member of Indian Society of Engineers, Member of Association of Engineers, Divisional sub-committee members of I.E., Member of SAE (USA).

Other Assignments

2. CHIEF COORDINATOR & CONVENOR----“PATENT PROMOTION AND ARCHIVAL CELL�, JADAVPUR UNIVERSITY.

3. PROJECT ON “INDUSTRY INSTITUTE PARTNERSHIP PROGRAMME� (CELL) WAS SUBMITTED TO AICTE BY DR. P.K. BOSE AND OTHERS AND THE SAME WAS APPROVED AND THE CELL HAS BEEN STARTED WITH VICE-CHANCELLOR AS A CHAIRMAN. DR. BOSE HAS BEEN NOMINATED AS A MEMBER OF ADMINISTRATIVE COMMITTEE.

4. PROJECT ON “MOBILITY OF INDUSTRIAL PERSONNEL� WAS SUBMITTED TO AICTE BY DR. P.K. BOSE. THE SAME WAS APPROVED BY AICTE WITH DR. BOSE AS CO-ORDINATOR, MECHANICAL ENGG. DEPT.

5. DIRECTOR, School of Automotive EngineeringJadavpurUniversity.

�

Innovation / Patents :

�

i)            � PROVISIONAL PATENT OBTAINED for "Magnetic Fuel Conditioner" under the guidance of the applicant. (66 / CAL / 96 � F), 9.3.2000

ii)             PATENT OBTAINEDfor Locking Device for Railway Fishplates Nuts and Bolts. (365 / KOL / 2003)

iii)          � PATENT OBTAINED for �An improved clamping and releasing device for battery leads and process for preparing the same�. Patent No. 198852, dated 04.2.2004

iv)           PATENT OBTAINED for “An apparatus for safety and security of railway track�. Patent No. 200118 dated 10.4.2006

v)          � PATENT OBTAINED for �A Protection Device of Manhole Covers�.(623/KOL/2006, dated 26th June, 2006)

vi)          � PATENT APPLIED for “Apparatus for eco-friendly vegetable oil fuelled cooking processes�. (976/KOL/2006, dated 26.09.2006)

vii)        � PATENT APPLIED for “Process for diesel soot particulate emission separator and the apparatus using the process�. (1204/KOL/2006, dated 13.11.2006)

1. “An experimental investigation on engine performance and emissions of a single cylinder diesel engine using hydrogen as inducted fuel and diesel as injected fuel with exhaust gas recirculation� International Journal of Hydrogen Energy Accepted 21 October 2008 (Published online) (2009)
2. “An Improved Theoretical Modeling of Cyclone Separator as a Diesel Soot Particulate Emission Arrester� International Journal of Automotive Technology accepted for publication (2009) (E2007166)
3. “An   Empirical   Approach In   Predicting The Cetane Number Of   Biodiesel� International Journal of Automotive Technology accepted for publication(2009) (E2007163)
4. � Use of HOT EGR and COOLED EGR in an agricultural diesel engine operated on hydrogen diesel blend�� Communicated to Renewable Energy; An International Journal (Ref. No.:� JBB-D-07-00588)
5. “Feasibility Study Of Ethanol As A Fuel In Blend With Diesel And Pongamia Methyl Ester As An Ignition Enhancer And Blend Stabilizer In An Existing Four Stroke Single Cylinder Compression Ignition Engine.� Communicated to Journal of Biomass and Bioenergy, Elsevier Editorial System (Ref. No.:� JBB-D-07-00588)
6. “Empirical Approach for the Prediction of Cetane Number from the FAME composition� International Journals of Renewable Energy, Inderscience (IJRET � 7540) (under review)
7. “Mathematical modeling for the prediction of fuel properties of biodiesel from their FAME composition�� International journal of Elsevier, Fuel (JFUE-D-09-00238) (under review)
8. “Theoretical and experimental modeling of cydone separator as diesel soot particular emission arrester with a continuous ceramic packed fiber filter placed at the end on the vortex finder tube� AMSE, Vol 77 No. 4 (2008)
9. “Design of reactive muffler for study on the noise level and performance of a two cylinder four stroke 16 h.p diesel engine� Noise & Vibration Worldwide, Volume 39,� pp. 24-27, Number 8, (2008).
10. “Analytical Modeling of Cyclone Separator with inner and outer vortex effect�,             J. Institution of Mechanical Engineers (India), Vol. 88, , pp. 13-19 (October 29, 2007).
11. “Analytical and Experimental Study on Noise Attenuation of Multi-cylinder Diesel Engine with Existing and Modified Muffler� Journal of Applied Sciences Research, 3(7), 587-593, (2007).
12. “Analytical and Experimental Study on Noise Attenuation of Multi-cylinder Diesel Engine with Resonative Muffler� Journal of Applied Sciences Research, 3(8), 676-680, (2007).
13. “Prediction of Noise Level by Mathematical Modeling in the Exhaust Muffler and Validation of these Analytical Results with the Experimental Results for 4-Stroke Diesel Engine�, Advances in Applied Mathematical Analysis (AAMA),Volume 2, Number 1,� pp 41-49, (2007).
14. “Studies on the Noise Level and Performance of a Two Cylinder Four Stroke 16 H.P Diesel Engine Using Modified Reactive and Resonative Muffler� Advances� in Applied Mathematical Analysis (AAMA), Volume 2, pp 31-39, Number 1 (2007).
15. Paramagnetic Defects and Charge Trapping Behavior of ZrO2 Films Deposited on Germanium by Plasma-Enhanced CVD,� Semiconductor Science and Technology 24, 025026, (2009).
16. �Charge Trapping Characteristics in High-k Gate Dielectrics on Germanium,� Thin Solid Films 517, 163-166 (2008).
17. “Studies on Dielectric Relaxation and Defect Generation for Reliability Assessments in Ultrathin High-k Gate Dielectrics on Ge,� Microelectronic Engineering 85, 2207-2212 (2008).
18. “Prediction of hardness for sintered HSS components using response surface method.� Manufacturing technology & Research An International Journal Vol.190,pp 123-129,(2007)
19. “Manufacturing of Sintered P/M H.S.S. Tool Inserts by Infiltration Tecnique� Manufacturing Technology & Research An International Journal, Vol.No.3&4, pp 43-47 July-Dec, 2006.

National Journal

1. �“Karanja oil � its potential and suitability as biodiesel�� - The Bulletin of Engineering and Science (National Journal) accepted (2009)
2. “Technology Forecasting for Developed India� The Indian Journal of Technical Education, Vol 31, No.3 pp 56, 2008.

International Conference

International Conference

1. Hydrogen fueled agricultural diesel engine with electronically controlled manifold induction : and experimental approach�  International Energy and sustainability conference 2009 to be held at Blogna Italy 23-25th June, 2009 (Paper accepted)�
2. �“Production of bio-diesel from Jatropha curcas and performance along with emission characteristics of an agricultural diesel engine using bio-diesel� International Energy and sustainability conference 2009 to be held at Blogna Italy 23-25th June, 2009 (Paper accepted)
3. �“An improved Theoretical Modeling of Cut Size Diameter of Cyclone Separator as a Diesel Shoot Particular Emission Arrester with Continuous Ceramic Packed Fiber Filter Placed at the End of the Vortex Finder Tube� �ASPAC to be held at China 25th May, 2009 (Paper accepted).
4. � Electro Cyclone as a Diesel Exhaust Shoot Particulate Emission Arrester� ASPAC to be held at China 25th May, 2009 (Paper accepted).
5. “Karanja or Jatropha� a better option for an Alternative Fuel in CI Engine�, Proceedings of the INTERNATIONAL CONFERENCE & XX NATIONAL CONFERENCE On I.C. ENGINES AND COMBUSTION (ICONICE � 2007),pp 321 � 326.
6.  “An experimental study on the emission characteristics of an existing four stroke single cylinder compression ignition engine using hydrogen in dual fuel mode with diesel.�� World Hydrogen Technologies Convention 2009 New Delhi
7. �“Development of hydrogen -diesel dual fuelled engine from an existing agricultural 4 -stroke diesel engine using timed manifold induction technique� International Conference & XX National Conference On IC Engines And Combustion 2007
8.  “Experimental Modeling of Cyclone Separator as a Diesel Soot Particulate Emission Arrester with a continuous ceramic packed fiber filter placed at the end of the vortex finder tube� International Conference & XX National Conference on I.C. Engine & Combustion, ICONICE � 2007, , pp. 739 - 745, Hyderabad, Andhra Pradesh, India (December 6-9,2007).
9.  “A New Theoretical Approach of Designing Cyclone Separator for Controlling Diesel Soot Particulate Emission�, SAE/2006 Commercial Vehicle Engineering Congress- Rosemont, Illinois, Chicago, USA, (31st October to 2nd November, 2006).                           

1. “Mathematical Modeling For Prediction Of Sound Pressure Level By The Exhaust Muffler And Validation Of Analytical Results With The Experimental Results For Two Cylinder Four Stroke 16 H.P Diesel Engine� in NCRAME (20-21) December, 2008, NIT Silchar
2. “Studies On The Noise Level And Loss Of Output Energy of A Two Cylinder Diesel Engine Using Modified Muffler� in NCRAME (20-21) December, 2008, NIT Silchar
3. �Jatropha Derived Biodiesel � its suitability as CI engine fuel�, proceedings of the SAE conference (SAE Number 2008 � 28 � 0040)
4. “Comparative study of Particulate Emission in Diesel Engine: An Environmental Threat�,� Proceedings of the 2nd.WMVC-2003 UGC/CSIR/DST Sponsored Second National Conference on Applicable Mathematics, , pp. 29 -35, A.C.College of Commerce, Jalpaiguri, West Bengal, India( March 15-16,2008).